všetko
Kľúčové slová k produktu
Zadajte účet so svojou e-mailovou adresou
Plochá 3D tlačiareň Tronxy X1
Share to:

Plochá 3D tlačiareň Tronxy X1

- Gun Metal Zásuvka EÚ
199489103

Podpora SD karta Off-line tlač + LCD displej + vysoká presnosť 0,1 - 0,4 mm
4.68 84 Zákaznícke hodnotenia | Please refer to English description
129.99 $154.01 16% ZĽAVA
Ušetrite navyše za používanie aplikácie

Naskenujte QR-kód pre nákup:

  • 1. Stiahnite si našu BEZPLATNÚ aplikáciu z Google Play alebo App Store.
  • 2. Spustite aplikáciu a zoskenujte kód QR pre priamu kúpu.

Postupujte podľa týchto krokov:

  • 1. Prihláste sa do lokality Gearbest.com
  • 2. Pridajte do vozíka produkty označené symbolom [].
  • 3. Otvorte našu aplikáciu a prejdite na stránku vozíka.
  • 4. Zaplaťte za svoju objednávku a získate okamžitú zľavu!
  • BEZPLATNÁ PREPRAVA
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Dodať medzi: Sep 20 - Sep 22, Odhadovaný čas prepravy: pracovné dni Spracovanie objednávky môže trvať niekoľko dní. Po odoslaní zo skladu čas prepravy (alebo doručenia) závisí od spôsobu prepravy.
  • +
  • bezúročné Môžete využiť maximálne 0 bezúročných nákupov na splátky, túto ponuku nemôžete využívať pri objednávaní spolu s inými produktmi
;   
Daňové info Ochrana cien Prehlásenie o cene Repair Warranty Report Item
Vybavenie

Produkty odporúčané pre Vás

Zákazníci, ktorí kúpili tento tovar, kúpili ešte

disclaimer:
●Pred montážou alebo obsluhou 3D tlačiarne si pozorne prečítajte a dodržiavajte návod na obsluhu.
●Úprava a prispôsobenie 3D tlačiarne sú prísne zakázané. Nenesieme žiadnu zodpovednosť za akékoľvek problémy vyplývajúce z úprav.
●Pre vašu oblasť používajte vždy správne striedavé napätie.
●3D tlačiareň neumiestňujte do blízkosti horľavých / horľavých materiálov alebo zdrojov tepla.
●3D tlačiareň používajte iba v dobre vetraných priestoroch. Dodržiavajte bezpečnú vzdialenosť od tlačiarne.

3D tlačiareň Tronxy X1 Desktop LCD

Popis:
Táto 3D tlačiareň máObjem 150 x 150 mm x 150 mm,Priemer dýzy 0,4 mm, Je vyrobený z hliníka.

Hlavné rysy:
●PodporujeKarta SD off-line, obzvlášť vhodné, keď bez počítača
Rozlíšenie vrstvy 0,1 - 0,4 mm, vysoká presnosť
●Objem 150 x 150 mm x 150 mm
Rozlíšenie vrstvy 0,1 - 0,5 mm urýchľuje proces navrhovania
LCD obrazovka zobrazuje informácie o tlači priamo a ľahko pre vás
●Enhanced stability and reliability: akrylová doska zabezpečuje stabilnejšiu tlač
●Podporuje3D printing filaments: PLA, ABS
●Operating system: Windows XP / 7 / Mac

špecifikácia

všeobecný

značka: Tronxy
typ: Kompletný počítač
Oblasť gravírovania: 150 x 150 mm x 150 mm
Množstvo trysky: jednoposteľová
Priemer trysky: 0,4mm
Tlač v režime offline s pamäťovou kartou: SD karta
LCD obrazovka: Áno
Podporný materiál: PLA
Priemer materiálu: 1,75mm
Presnosť polohovania osi XY: 0,012 mm
Presnosť polohovania osi Z: 0,004 mm
Typ balenia: nezmontované balenie
certifikát: CE,FCC,RoHS

Rozmery a hmotnosť

Hmotnosť výrobku: 3,5000 kg
Hmotnosť balíka: 4,8200 kg
Veľkosť produktu: 34,00 x 36,50 x 35,00 cm / 13,39 x 14,37 x 13,78 palca
Veľkosť balíka: 32,70 x 29,70 x 15,20 cm / 12,87 x 11,69 x 5,98 palcov

Obsah balenia

Obsah balenia: 1 x stolová 3D tlačiareň
Plochá 3D tlačiareň Tronxy X1- Gun Metal Zásuvka EÚ
Plochá 3D tlačiareň Tronxy X1- Gun Metal Zásuvka EÚ
Plochá 3D tlačiareň Tronxy X1- Gun Metal Zásuvka EÚ
Plochá 3D tlačiareň Tronxy X1- Gun Metal Zásuvka EÚ
Plochá 3D tlačiareň Tronxy X1- Gun Metal Zásuvka EÚ

Asi by sa vám páčilo

Zákaznícke hodnotenia

4.68 out of 5
  • 62
  • 19
  • 2
  • 0
  • 1
See all 84 reviews Napíšte hodnotenie
  • Jasen
    Áno (2) Farba: Gun Metal Veľkosť: US Plug
    Great starter printer
    I saw this printer reviewed on YouTube and decided to get one. It's not my first 3d printer ( I have a scratch built delta and had a prusa i3 clone that I scavenged to make the delta). I decided to get this printer to see what modern kits were like.

    it's really easy to assemble. I like V-rail. I use it in my workshop to make jigs and I have a CNC that I scratch-built from it.

    The Tronxy kit works just like the YouTube videos say it does. it's cheap and easy (and fast) to build. There are a few shortcomings, but with a little work, you can get a reliable printer for a very nice price.

    I have had very few failed prints (all while trying to print over USB), but I am experienced with printing. I've printed about 2kg of PLA with mine now...
    Suggestion
    There is a design flaw in the gantry plate that makes the gantry too loose. I fixed it with a metal file.
    The Y carriage assembly was loose, but I was able to just tighten the wheels so it gripped the v-rail.

    most importantly, I received a bad power supply that melted itself. I will try to attach pictures. I didn't like how hot the power brick was getting, so I never left the printer unattended... good thing, the connector melted into the acrylic and the brick itself started to melt. I've since replaced the brick with a larger 12v 360w power supply that I had left from my old i3 clone, and used some anderson powerpole connectors (rated to 20 amps) overkill, I know, but it's what I had.

    the last con, though a small one, the print volume is... small... about a 6" cube. (14cm)... a little less actually. but if you just want to print some little PLA things and get into the world of 3d printing to see if it's for you, that's not a big deal.

    Apr 05,2018

  • Caverntwo
    Áno (4) Farba: Gun Metal Veľkosť: EU Plug
    A Small but Good 3D-Printer
    The printer arrived well packaged. The included SD-card contains a very good manual. No wiring of mains electricity is needed due to a closed PSU. The printer prints very nicely and accurate with no layer offset. The extruder and hot-end are very well-designed, already utilizing the Bowden-setup. Furthermore, the controller has outputs for both a heated bed as well as a part cooling fan, and the aluminum extrusions are of the European standard 2020 and 2040, allowing for possible future size upgrades (at least along the y- and z-axis). My printer arrived with 10m of black sample PLA.
    Suggestion
    The most negative point of the build is the incomplete set of screws. In my case, the package lacked 8 plastic spacers, some 8mm M3 screws as well as a T-nut. Luckily, I could substitute all the missing parts. Furthermore, the printer has a lot of play, especially on the y-axis, which can luckily be fixed with some upgrades. The SD-card is not easily reachable, with an SD-extension cable helping a lot.

    May 07,2017

  • Mark sawdon
    Áno (0) Farba: Gun Metal Veľkosť: US Plug
    tronxy x1
    pros: kit build teaches newer users how it works. operation is easy to understand. size is perfect for beginners. cost is excellent for starting into 3d printing without breaking the bank.

    cons: wobble in x axis was slightly difficult to overcome at first without access to 3d printed upgrades.. but with help of facebook community for tronxy x1, I was able to overcome in a few days. print the upgrades, it will teach you a lot about how it works.
    Suggestion
    the tronxy x1 is a great starter kit for a novice getting into 3d printing. building it from a kit allows you to physically see how things come together and work and helps you in trouble shooting any issues later. you will want to print upgrades to this machine, and each will be a lesson about functionality of the device. I've had my machine for 7 months now and love it, I've already ordered another larger printer to work along side this one.. my kids and wife like being able to print on this too. Facebook has a tronxy x1 group that is very knowledgeable and friendly when it comes to answering questions and helping fellow users.. I hope to see you there and help you as they helped me... would definitely buy this all over again.. a great introduction to 3d printing.

    Aug 07,2018

  • Pieter
    Áno (0) Farba: Gun Metal Veľkosť: EU Plug
    It works!
    This is a great little machine, I build it in 3 hours. Order of operations where sometimes “wrong” in the manual but still better than what I’ve heard of many other machines. This is my first 3D printer and it was very doable! One complaint that I do have is that the pla that came with it was in 100 very small pieces thus not useable! But you do have to order your own anyways. Great little machine overall it’s printing right as I speak!
    Suggestion
    Filament was broken

    Aug 11,2018

  • Sylvain
    Áno (0) Farba: Gun Metal Veľkosť: EU Plug
    Most affordable but decent 3D printer
    Great value fro the price, if you are not afraid to spend time and have to tinker a little bit.
    Nice first 3D printer, that may indeed be enough to fill your needs, or at least allow you to learn 3D printing at a budget before you get a bigger, more expensive printer.
    I needed an afternoon to put it together, however I lost time because of some little hardware issues.
    Assembly is not all, after it you need to do tests and settings tweaking, it will keep you busy for a few more hours !
    Suggestion
    All the thingsI notice and that could be improved:
    The assembly instructions do not tell at all how to deal with the wire looms. There is not enough spiral cable sleeve provided, luckily I had some in stock (they should provide twice the amount, at least).
    Some small hardware issues like a missing screw and a butterfly nut that was NOT THREADED. Nothing too terrible if you have a stock of random screws and hardware.
    Pro tip: loose set screws on a belt pulley will give you a headache, make sure they are tight.
    The quality of the filament sample provided was catastrophic, the first test print ended in a shapeless blob of plastic... luckily things went a lot better with an other filament, still some tests and tuning to do but I printed my first half decent calibration cube.

    Jan 13,2018

Otázky a odpovede zákazníkov

  • Všetko
  • Informácie o produkte
  • Stav skladu
  • Platba
  • O preprave
  • Iné

Buďte prví, kto položí otázku. Chcete GB body? Stačí napísať hodnotenie!

Buďte prví, kto položí otázku. Chcete GB body? Stačí napísať hodnotenie!

Buďte prví, kto položí otázku. Chcete GB body? Stačí napísať hodnotenie!

Buďte prví, kto položí otázku. Chcete GB body? Stačí napísať hodnotenie!

Buďte prví, kto položí otázku. Chcete GB body? Stačí napísať hodnotenie!

Buďte prví, kto položí otázku. Chcete GB body? Stačí napísať hodnotenie!

0 Otázky a odpovede Zobraziť všetky>

Sponzorované produkty súvisiace s touto položkou

Vaše nedávno prezerané položky

Pozrieť prispôsobené odporúčania

Nový zákazník? Začnite tu
Predpredajný servis